Project Reclamation

Wikipedia has quite an extensive description of Mountaintop Removal. I found it very informative when I was first learning about MTR and coal mining. Here is a preview:

Mountaintop removal mining (MTR), also known as mountaintop mining (MTM),^[8] is a form of surface mining that involves the topographical alteration and/or removal of a summit, summit ridge, or significant portion of a mountain, hill, or ridge in order to obtain a desired geologic material.

The MTR process involves the removal of coal seams by first fully removing the overburden laying atop them, exposing the seams from above. This method differs from more traditional underground mining, where typically a narrow shaft is dug which allows miners to collect seams using various underground methods, while leaving the vast majority of the overburden undisturbed. The overburden waste resulting from MTR is either placed back on the ridge, attempting to reflect the approximate original contour of the mountain,^[9] and/or it is moved into neighboring valleys.^[3]

The process involves blasting with explosives to remove up to 400 vertical feet (120 m) of overburden to expose underlying coal seams. Excess rock and soil laden with toxic mining byproducts are often dumped into nearby valleys, in what are called “holler fills” or “valley fills.”^[4][5][6]

MTR in the United States is most often associated with the extraction of coal in the Appalachian Mountains, where the United States Environmental Protection Agency (EPA) estimates that 2,200 square miles (5,700 km²) of Appalachian forests will be cleared for MTR sites by the year 2012.^[10] Sites range from Ohio to Virginia.^[3] It occurs most commonly in West Virginia and Eastern Kentucky, the top two coal-producing states in Appalachia, with each state using approximately 1,000 tonnes of explosives per day for surface mining.^[11] At current rates, MTR in the U.S. will mine over 1.4 million acres (5,700 km²) by 2010,^[12] an amount of land area that exceeds that of the state of Delaware.

Mountaintop removal has been practiced since the 1960s.^[3] Increased demand for coal in the United States, sparked by the 1973 and 1979 petroleum crises, created incentives for a more economical form of coal mining than the traditional underground mining methods involving hundreds of workers, triggering the first widespread use of MTR. Its prevalence expanded further in the 1990s to retrieve relatively low-sulfur coal, a cleaner-burning form, which became desirable as a result of amendments to the U.S. Clean Air Act that tightened emissions limits on high-sulfur coal processing.^[13]

http://en.wikipedia.org/wiki/Mountaintop_removal_mining